Mobile Communication

Operation Check

~2min read

OPERATION CHECK

TOYOTA ENTUNE APP SUITE CONNECT FUNCTION RESET PROCEDURE

(a) Reproduce the symptoms of the problem.

(b) Check for DTCs and repair the systems for which DTCs are output.

Click here

(c) Check cellular phone compatibility.

(1) Check whether the cellular phone and vehicle are compatible (refer to http://www.toyota.com/Entune/).

(2) If the cellular phone is not compatible, recommend that the customer select a compatible cellular phone.

(d) Delete all paired devices from the cellular phone.

(1) The procedure varies depending on the phone model. Contact the service provider or cellular phone manufacturer if assistance is needed.

(e) Remove the Toyota Entune App Suite Connect application from the phone.

NOTICE:

Only perform this step if the customer is present and agrees.

(1) The procedure varies depending on the phone model. Contact the service provider or cellular phone manufacturer if assistance is needed.

(f) Reset the phone.

NOTICE:

Only perform this step if the customer is present and agrees.

(1) Turn off the phone and remove the battery for 15 seconds. For instructions on resetting cellular devices, refer to the manufacturer's website.

(g) Reinstall the Toyota Entune App Suite Connect application on the phone (if removed).

(1) The procedure varies depending on the phone model. Contact the service provider or cellular phone manufacturer if assistance is needed.

(h) Delete all personal data from the radio receiver and display assembly.

(1) Delete all personal data from the radio receiver and display assembly.

NOTICE:

Only perform this step if the customer is present and agrees.

HINT:

Applications must be reinstalled for them to appear on the radio receiver and display assembly.

(i) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

After turning the ignition switch OFF, a waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, be sure to read the precautions for disconnecting the cable from the negative (-) battery terminal before performing the work.

Click here

(1) Record all radio station presets.

(2) Disconnect the cable from the negative (-) battery terminal and leave it disconnected for 2 minutes.

(j) Check whether the symptom of the problem disappears.