Theft Deterrent / Keyless Entry

Removal

~1min read

REMOVAL

PRECAUTION / NOTICE / HINT

The procedures required (adjustment, calibration, initialization or registration) that must be performed after parts have been removed and installed, or replaced during removal/installation of the ID code box (immobilizer ECU), are shown below.

Procedure Required After Replacing / Removing / Installing Parts

Replacement part or procedure

Necessary Procedures

Effects / Inoperative Function When Necessary Procedure Not Performed

Link

Disconnect the cable from the negative (-) battery terminal.

Initialize Back Door Lock

Door Lock Control System

Memorize Steering Angle Neutral Point

Lane Departure Alert System (with Steering Control)

Pre-Collision System

ID Code Box (Immobilizer ECU)

Perform Code Registration (Immobilizer System)

  • Wireless Door Lock Control System
  • Smart Key System
  • Engine start function
  • Steering lock system

with Smart Key System:

PROCEDURE

1. REMOVE AIR CONDITIONING UNIT ASSEMBLY (for cold region vehicles)

Click here

2. REMOVE AIR CONDITIONING UNIT ASSEMBLY (except cold region vehicles)

Click here

3. REMOVE ID CODE BOX (IMMOBILIZER ECU)

(a) Release the guides to remove the ID code box (immobilizer ECU), as shown in the illustration.

Remove in this direction (1)

Remove in this direction (2)