Removal
REMOVAL
PRECAUTION / NOTICE / HINT
The procedures required (adjustment, calibration and initialization or registration) must be performed after the parts removed, installed or replaced during transponder key ECU assembly removal/installation are shown below.
Procedure Required After Replacing / Removing / Installing PartsReplacement part or procedure | Necessary Procedures | Effects / Inoperative Function When Necessary Procedure Not Performed | Link |
|---|---|---|---|
Disconnect the cable from the negative (-) battery terminal. |
Initialize Back Door Lock |
Door Lock Control System |
|
Memorize Steering Angle Neutral Point |
Lane Departure Alert System (with Steering Control) |
||
Pre-Collision System |
|||
Transponder Key ECU Assembly |
Perform Code Registration (Immobilizer System) |
Starting the engine |
without Smart Key System: |
PROCEDURE
1. REMOVE AIR CONDITIONING UNIT ASSEMBLY (for cold region vehicles)
Click here
![]()
2. REMOVE AIR CONDITIONING UNIT ASSEMBLY (except cold region vehicles)
Click here
![]()
3. REMOVE TRANSPONDER KEY ECU ASSEMBLY
(a) Release the guides to remove the transponder key ECU assembly as shown in the illustration.
![]() |
Remove in this direction (1) |
![]() |
Remove in this direction (2) |
.gif)
.png)
.png)