Heater / Air Conditioning
Inspection On Vehicle
In this manual: Heater / Air Conditioning
~1min read
INSPECTION ON VEHICLE
PROCEDURE
1. INSPECT COOLER CONDENSER ASSEMBLY
(a) If the fins of the cooler condenser assembly are dirty, clean them with water and dry them with compressed air.
NOTICE:
Do not damage the fins of the cooler condenser assembly.
(b) If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.
2. CHECK FOR REFRIGERANT LEAKS
(a) Using a halogen leak detector, check the pipe joints for refrigerant leaks.
(b) If a refrigerant leak is detected at a joint, check the bolt torque of the joint.
Was this page helpful?