Park/neutral position switch assy (ATM)

1. 1

   Apply the parking brake and turn the ignition switch to ON.

2. 2

   Depress the brake pedal and check that the engine starts only when the shift lever is set in N or P position.

3. 3

   Check that the back−up light is lit and the reverse warning buzzer sounds only when the shift lever is set in R position.

If a failure is found, check the park/neutral position switch for continuity.

1. 1

   Loosen the 2 bolts of park/neutral position switch and set the shift lever to the N position.

2. 2

   Align the groove with neutral basic line.

3. 3

   Hold the switch in position and tighten the 2 bolts.

   Torque: 5,4 N·m
4. 4

   After adjustment, perform the inspection described in step 1.