Automatic transmission / trans
Automatic transaxle fluid (ATM)
In this manual: Automatic transmission / trans
5steps
~30min
2/5difficulty
Done 0 of 5
ON−VEHICLE INSPECTION 1. CHECK FLUID LEVEL
Check fluid level
HINT: Drive the vehicle so that the engine and transaxle are at the normal operating temperature.
Fluid temperature: 70 to 80 C (158 to 176 F)
Check fluid level
- Park the vehicle on a level surface and set the parking brake.
- With the engine idling and the brake pedal depressed, shift the lever into all positions from the P to the L position, and return to the P position.
- Pull out the dipstick and wipe it clean.
- Push it back fully into the pipe.
- Pull it out and check that the fluid level is within the HOT range.
If there are leaks, it is necessary to repair or replace O−rings, FIPGs, oil seals, plugs or other parts.
Test yourself
A quick Toyota Camry quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?