Toyota Land Cruiser Quiz
Body Electrical

Disassembly

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
010203040503.43N·mlb·ft
Tightening torque found on this page

1. PULL OUT EVAPORATOR TEMPERATURE SENSOR

PULL OUT EVAPORATOR TEMPERATURE SENSOR

2. REMOVE EXPANSION VALVE

REMOVE EXPANSION VALVE

Using a hexagon wrench (5.0mm, 0.20 in.), remove the 2 bolts and separate the expansion valve and the evaporator.

Torque: 3,4 N·m

NOTICE: Cap the open fittings immediately to keep moisture or dirt out of the system.

HINT: At the time of reassembly, lubricate 4 new O-rings with compressor oil and install them to the valve. If evaporator is replaced, add compressor oil to the evaporator.

Add: 40 cc (1.4 fl.oz.) Compressor oil: ND-OIL8 or equivalent

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.