Body Electrical

Installation

~1min read
010203040501813N·mlb·ft
Tightening torque found on this page

1. INSTALL THROTTLE BODY

INSTALL THROTTLE BODY

(a) Connect the water bypass hose to the manifold thermostat on the throttle body.

INSTALL THROTTLE BODY

(b) Install a new gasket and the throttle body with the 2 bolts and the 2 nuts.

Torque: 18 N·m

(c) Connect the water bypass hose and the PCV hose to the throttle body.

(d) Connect the throttle control connector.

2. INSTALL INTAKE AIR CONNECTOR

3. FILL WITH ENGINE COOLANT (CO-2 )

4. START ENGINE AND CHECK FOR ENGINE COOLANT LEAKS

5. INSTALL V-BANK COVER

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.