Toyota Land Cruiser Quiz
Body Electrical

Removal

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
01020304050107N·mlb·ft
Tightening torque found on this page

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

HINT: At the time of installation, evacuate air from refrigeration system and charge system with refrigerant and inspect for leakage of refrigerant.

Specified amount: 1,050 +- 50 g (37.03 +- 1.76 oz.)

2. REMOVE RADIATOR GRILL

3. REMOVE PRESSURE SWITCH FROM LIQUID TUBE

REMOVE PRESSURE SWITCH FROM LIQUID TUBE

Disconnect the connector and remove the pressure switch.

Torque: 10 N·m

HINT:

  • Lock the switch mount on the tube with an open-end wrench, be careful not to deform the tube, and remove the switch.
  • At the time of installation, lubricate a new O-ring with compressor oil and install the switch.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.