A-TRAC Indicator Light does not Come ON
The A-TRAC does not operate even if the A-TRAC switch is pressed under the following conditions:
- The TRAC or VSC system is faulty.
- The temperature inside the hydraulic brake booster increases and the A-TRAC operation is suspended.
Refer to A-TRAC Indicator Light Remains ON (See page
).
NOTICE:
- When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page
). - Inspect the fuses for circuits related to this system before performing the following inspection procedure.
CHECK CAN COMMUNICATION SYSTEM
.gif)
| NG | ![]() |
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
|
CHECK HARNESS AND CONNECTOR (ATRC TERMINAL)
.gif)
| NG | ![]() |
GO TO STEP 4 |
|
READ VALUE USING TECHSTREAM (A-TRC(TRAC) SWITCH)
.gif)
| OK | ![]() |
GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
| NG | ![]() |
REPLACE MASTER CYLINDER SOLENOID |
INSPECT A-TRAC SWITCH
.gif)
| NG | ![]() |
REPLACE A-TRAC SWITCH |
|
INSPECT ROOF CONSOLE BOX ASSEMBLY
.gif)
| A | ![]() |
REPAIR OR REPLACE HARNESS OR CONNECTOR (MASTER CYLINDER SOLENOID - ROOF CONSOLE BOX ASSEMBLY) |
| B | ![]() |
REPLACE ROOF CONSOLE BOX ASSEMBLY |
| C | ![]() |
REPLACE ROOF CONSOLE BOX ASSEMBLY |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
.gif)
.gif)