SM Solenoid Circuit (C1225-C1228,C1468,C1469,C146A,C146B)
The solenoid goes on when signals are received from the skid control ECU (master cylinder solenoid) and controls the pressure action on the wheel cylinders thus controlling the braking force.
DTC No. | DTC Detecting Conditions | Trouble Areas |
|---|---|---|
C1225 |
Open or short in SMCR circuit continues for 0.05 seconds or more. |
|
C1226 |
Open or short in SREA circuit continues for 0.05 seconds or more. |
|
C1227 |
Open or short in SREC circuit continues for 0.05 seconds or more. |
|
C1228 |
Open or short in STR circuit continues for 0.05 seconds or more. |
|
C1468 |
Open or short in SFRH or SFRR circuit continues for 0.05 seconds or more. |
|
C1469 |
Open or short in SFLH or SFLR circuit continues for 0.05 seconds or more. |
|
C146A |
Open or short in SRRH or SRRR circuit continues for 0.05 seconds or more. |
|
C146B |
Open or short in SRLH or SRLR circuit continues for 0.05 seconds or more. |
|
PROCEDURE
RECONFIRM DTC
HINT:
This DTCs are set when a problem is identified in the master cylinder solenoid.
The solenoid circuit is in the master cylinder solenoid.
Therefore, solenoid circuit inspection and solenoid unit inspection cannot be performed. Be sure to check if the DTCs are output before replacing the master cylinder solenoid.
(a) Clear the DTC (See page
).
(b) Check if the same DTCs are detected.
Result | Proceed to |
|---|---|
DTC output |
A |
DTC not output |
B |
| A | ![]() |
REPLACE MASTER CYLINDER SOLENOID |
| B | ![]() |
END |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
.gif)