Lighting

Installation

~1min read
010203040505.44N·mlb·ft
Tightening torque found on this page
INSTALLATION CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the LH and RH sides.
  • The procedure described below is for the LH side.
PROCEDURE

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect the connectors.

(b) Engage the clamp to install the headlight assembly.

(c) Install the bolt.

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

(d) Install the 2 screws.

(e) Remove the protective tape.

2. INSTALL FRONT BUMPER ASSEMBLY

(See page ) ) )

3. ADJUST HEADLIGHT AIMING

(See page Reassembly )

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.