Toyota Venza: Installation

INSTALLATION PROCEDURE

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the guide and 2 pins, and install the rear combination light assembly as shown in the illustration.

Text in Illustration

*1	Pin
*2	Guide

(b) Install the rear combination light assembly with the 2 nuts.

Torque:

6,8 N·m {69 kgf·cm, 60 in·lbf}

(d) Connect the connector.

2. INSTALL REAR BUMPER ASSEMBLY

3. INSTALL REAR BUMPER PLATE LH

4. INSTALL REAR BUMPER PLATE RH

5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

6. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

7. CONNECT REAR SEAT OUTER BELT ASSEMBLY

8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

9. INSTALL RECLINING REMOTE CONTROL BEZEL

10. INSTALL REAR SEAT ASSEMBLY LH (for LH Side)

11. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY (for LH Side)

12. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for LH Side)

13. INSTALL REAR SEAT INNER TRACK BRACKET COVER (for LH Side)

14. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

15. INSTALL REAR SEAT ASSEMBLY RH (for RH Side)

16. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (for RH Side)

17. INSTALL REAR SEAT OUTER TRACK BRACKET COVER (for RH Side)

18. INSTALL REAR SEAT INNER TRACK BRACKET COVER (for RH Side)

19. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)

20. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

21. INSTALL REAR FLOOR FINISH PLATE

22. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY

23. INSTALL NO. 1 DECK BOARD

24. INSTALL DECK SIDE TRIM BOX LH

25. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

26. INSTALL DECK SIDE TRIM BOX RH

27. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

28. INSTALL DECK BOARD ASSEMBLY

29. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

30. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

31. INSTALL REAR DOOR SCUFF PLATE

Installation