Removal

REMOVAL PROCEDURE

1. REMOVE REAR DOOR SCUFF PLATE

2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

4. REMOVE DECK BOARD ASSEMBLY

5. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

6. REMOVE DECK SIDE TRIM BOX LH

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

8. REMOVE DECK SIDE TRIM BOX RH

9. REMOVE NO. 1 DECK BOARD

10. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY

11. REMOVE REAR FLOOR FINISH PLATE

12. REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side)

13. REMOVE REAR SEAT INNER TRACK BRACKET COVER (for LH Side)

14. REMOVE REAR SEAT OUTER TRACK BRACKET COVER (for LH Side)

15. DISCONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY (for LH Side)

16. REMOVE REAR SEAT ASSEMBLY LH (for LH Side)

17. REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side)

18. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)

19. REMOVE REAR SEAT INNER TRACK BRACKET COVER (for RH Side)

20. REMOVE REAR SEAT OUTER TRACK BRACKET COVER (for RH Side)

21. DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (for RH Side)

22. REMOVE REAR SEAT ASSEMBLY RH (for RH Side)

23. REMOVE RECLINING REMOTE CONTROL BEZEL

24. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

25. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

27. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)

28. REMOVE REAR BUMPER PLATE LH

29. REMOVE REAR BUMPER PLATE RH

30. REMOVE REAR BUMPER ASSEMBLY

31. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Remove the 2 nuts.

(b) Disconnect the connector.

(c) Disengage the clamp.

(d) Disengage the 2 pins and guide, and remove the rear combination light assembly as shown in the illustration. Text in Illustration *1 Pin *2 Guide