Removal

HINT:

• Use the same procedure for the RH and LH sides.
• The procedure described below is for the LH side.

1. PRECAUTION (for HID Headlight)

(See page )

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work (See page ).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

3. REMOVE FRONT BUMPER ASSEMBLY

(See page )

4. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the bolt and 3 screws.

(b) Disconnect each connector and remove the headlight assembly.