Regolazione della pressione degli pneumatici

La pressione degli pneumatici diminuisce nel tempo, il che è normale. La pressione degli pneumatici deve quindi essere regolata per mantenere la pressione raccomandata.

Use the recommended inflation pressure for cold tires to help maintain good tire performance and even wear.

NOTA

To help prevent incorrect inflation pressure, pressure should be checked when the tires are cold. The tires are considered to be cold when they have reached the same temperature as the ambient temperature (about 3 hours after the vehicle was last driven). After driving for a few kilometers, the tires will warm up and the pressure will increase.

1. 1
   Remove the valve cap from the tire and press the air pressure gauge firmly onto the valve.
2. 2
   Inflate the tire to the correct inflation pressure; see the tire pressure placard on the driver's side B pillar for recommended pressures for factory-mounted tires.
3. 3
   Screw the valve cap back on.

   • After inflating a tire, always replace the valve cap to help prevent valve damage caused by gravel, dirt, etc.
   • Utilizzare solo tappi valvola in plastica. I tappi in metallo potrebbero corrodersi e diventare difficili da rimuovere.
4. 4
   Visually inspect the tire to make sure there are no nails or other embedded objects that could puncture the tire and cause air leakage.
5. 5
   Check the sidewalls to make sure there are no gouges, cuts, bulges or other irregularities.
6. 6
   Repeat this procedure for each tire, including the spare tire¹.

¹ Non disponibile su tutti i modelli.