Getting to know your vehicle
Front seats
In this manual: Getting to know your vehicle
~1min read
Moving forward or backward

Lift lever 1 to unlock the seat.
Once the seat is in the desired position, release lever 1 and make sure the seat is locked.
Raising or lowering the driver's seat
Depending on the vehicle version, lift handle 2, set the seat to the desired height, then release the lever.
Reclining the seat back

Pull lever 4 and tilt the seat back to the desired position.
Heated seats
Depending on the vehicle version, with the ignition on, press switch 3.
Equipped with a thermostat, the system decides whether heating is needed or not.
To switch the function off, press switch 3 again.
For safety reasons, these adjustments must be made when the vehicle is stationary. We advise against tilting the seat backs too far back, as this may reduce the effectiveness of the rear seat belts. Make sure the seat backs are locked securely. No object may be placed on the floor (driver's side): in the event of sudden braking, such objects may slide under the pedals and prevent their use.Test yourself
A quick Dacia Sandero / Logan quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?