Getting to know your vehicle
Headlamp beam height adjustment
In this manual: Getting to know your vehicle
~1min read
Control A is used to adjust the headlamp beam height according to the vehicle load.
Turn control A anticlockwise to lower the beam and clockwise to raise the beam.
When driving in a country where traffic drives on the opposite side (for example, a vehicle with the driver's seat on the left driving abroad, or vice versa), have the headlamps adjusted by an Authorised Dealer for the duration of the stay.Examples of control A settings according to vehicle load |
|||
All versions except Societe and estate |
Estate |
Societe version |
|
| Driver only or driver with front passenger | 0 | 0 | 0 |
| Driver with front passenger and two or three rear passengers | 1 | 1 | - |
| Driver with front passenger, three rear passengers and luggage | 3 | 2 | - |
| Driver with luggage or load up to the maximum permissible load | 4 | 3 | 3 |
Test yourself
A quick Dacia Sandero / Logan quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?