Five-Speed Transmission and Final Drive RPO MM5
Speedometer Drive
In this manual: Five-Speed Transmission and Final Drive RPO MM5
~1min read
Remove or disconnect:
PROCEDURE.
1. Disconnect the negative battery cable.
2. Speedometer drive cable and vehicle speed sensor electrical connector..
3. Remove bolt 103 and retainer plate..
4. Remove driven gear and bushing from the housing
101..
5. O-ring
102..
Installation
PROCEDURE.
1. O-ring
102. Lubricate O-ring 102 with mineral-based grease.
grease.
2. Insert bushing 101 with driven gear into the housing..
3. Install bolt 103 and retainer plate. Tighten speedometer drive mounting bolt
to torque 5 N·m..
4. Speedometer drive cable and vehicle speed sensor electrical connector..
5. Negative battery cable.
Test yourself
A quick Daewoo Nexia quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?