Intermediate Lever

GENERAL INFORMATION

Shift Mechanism Drive

210. BOLT.

211. WASHER.

212. CLAMP

213. ADJUSTING END FITTING WITH EYE.

214. ROD.

220. BUSHING.

223. SHAFT LOCK.

224. SHAFT WITH FORK

237. PIVOT SHAFT.

238. INTERMEDIATE SHAFT WITH LEVER.

239. LEVER SHAFT.

241. SHAFT

Universal Joint of Control Mechanism Drive

223. SHAFT LOCK.

237. JOINT PIN

Intermediate Lever Joint

217. INTERMEDIATE LEVER.

220. BUSHING.

239. LEVER PIVOT PIN

Remove or disconnect:

PROCEDURE.

1. Disconnect the negative battery cable.

2. Rod

214..

3. Retainer 223 of pin and pin 237 of universal joint...

4. Disconnect clamp bolt..

4a. Disconnect joint 213 from the shaft

214..

5. Pin 239 of intermediate lever and spring retainer

221..

6. Intermediate lever 217, joint 213 and shaft 238 with lever..

7. Bushings 219 and

220..

8. Remove spring rings from intermediate lever joints and disconnect joint 213 and shaft lever

238..

Install or connect

Installation of Intermediate Lever Pin Bushings

217. INTERMEDIATE LEVER.

220. BUSHING

PROCEDURE.

1. Joint 213 and shaft lever 238 to intermediate lever

217..

1a. Install spring rings of the joints..

2. Insert bushings 220 into the lever

217. Before installation, lubricate bushings with silicone grease..

3. Install intermediate lever onto pin

239. Check that the spring retainer is securely installed.

retainer..

4. Install joint 213 onto shaft

241..

5. Pin 237 of universal joint and spring retainer 223 of pin. Before installation,

lubricate pin with silicone grease..

6. Rod

214..

7. Adjust drive and tighten clamp bolt 210..

8. Negative battery cable.