Side Curtain Airbag. Removal and Installation

Removal

1. 1
   Disarm the SRS.
   Refer to: Supplemental Restraint System (SRS) Disarming and Re-arming (501-20B Supplemental Restraint Systems, General Procedures).
2. 2
   Remove the headliner.
   Refer to: Headliner - 4-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
   Refer to: Headliner - 5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
3. 3
   Disconnect the side curtain air bag electrical connector.

   

4. 4
   Vehicles with power sunroof: remove the retainers and bracket.

   

5. 5
   • Remove the bolts.
     Torque: 80 lb-in (9 N·m)

   • Remove the pin-type retainer.

   

6. 6
   • Remove the bolts.
     Torque: 80 lb-in (9 N·m)

   • Remove the pin-type retainer.

   

7. 7
   Disconnect the side curtain airbag bracket and pin retainers.

   

8. 8
   Disconnect the side curtain airbag retainers from the sheet metal.

   

9. 9
   Disconnect the side curtain airbag retainer from the sheet metal.

   

10. 10
    
    Remove the side curtain airbag.
    

    1. Slide the side curtain airbag rearward.

    2. Disconnect the T-tab from the sheet metal and remove the side curtain airbag.

    

Installation

1. 1
   To install, reverse the removal procedure.
2. 2
   Re-arm the SRS.
   Refer to: Supplemental Restraint System (SRS) Disarming and Re-arming (501-20B Supplemental Restraint Systems, General Procedures).