Specifications

Engine

Item	Specification
Displacement	1.5L turbocharged gasoline direct injection engine (GTDI)
Number of cylinders	4
Bore/Stroke	3.1–3.0 in (79.015–76.4 mm)
Firing order	1-2-4-3
Spark Plug	12405
Spark Plug Gap	0.028 in (0.7 mm)
Compression ratio	10:1
Engine weight - (with flexplate)	213.2 lb (96.7 kg)
Engine and Transmission Weight — Automatic Transmission	381.2 lb (172.9 kg)

Lubricants

Item	Specification
Motorcraft® SAE 5W-20 Synthetic Blend Premium Motor Oil (USA); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)	XO-5W20-QSP (USA); CXO-5W20-LSP12 (Canada)

Engine oil capacity

Item	Specification
Service refill, including oil filter	4.28 qt (4 L)
Service fill without oil filter	3.96 qt (3.8 L)

Oil Pressure

Item	Specification
Oil Pressure (Hot at 800 rpm)	14.5 psi (100 kPa)
Oil pressure (hot at 2000 rpm)	29.0 psi (200 kPa)

Cylinder block

Item	Specification
Cylinder bore diameter	3.110 – 3.111 in (79.005 – 79.025 mm)
Maximum cylinder out-of-round	0.0003 in (0.008 mm)
Main bearing bore diameter	2.126 – 2.127 in (54 – 54.018 mm)
Cylinder head gasket surface flatness	0.05 mm (0.002 in) over an area of 200 mm (7.874 in) x 200 mm (7.874 in)

Piston

Item	Specification
Piston Configuration - Single	3.1090 – 3.1095 in (78.9675 – 78.9825 mm)
Piston-to-bore clearance	0.0009 – 0.0023 in (0.0225 – 0.0575 mm)
Ring groove width - top	0.049 – 0.050 in (1.25 – 1.27 mm)
Ring groove width - 2nd	0.048 – 0.049 in (1.22 – 1.24 mm)
Ring groove width - oil	0.079 – 0.080 in (2.01 – 2.03 mm)
Piston Skirt Coating Minimum Thickness	0.0004 in (0.009 mm)

Piston pin

Item	Specification
Diameter	0.827 – 0.827 in (20.994 – 21 mm)
Length	1.80 – 1.81 in (45.7 – 46 mm)
Piston-to-Pin Clearance	0.0002 – 0.0007 in (0.006 – 0.017 mm)
Pin clearance	0.0007–0.0012 in (0.018–0.03 mm)

Cylinder head cover

Item	Specification
Cylinder head flatness	0.004 in (0.1 mm) overall
Valve lift at zero clearance (exhaust)	0.260 in (6.6 mm)
Valve lift at zero clearance (intake)	0.311 in (7.9 mm)
Valve Guide Bore Diameter	0.197 – 0.198 in (5 – 5.02 mm)
Valve Seat Width - Intake	0.0449–0.0059 in (1.14–0.15 mm)
Valve Seat Width - Exhaust	0.0256–0.0059 in (0.65–0.15 mm)
Valve Seat Width - Intake/Exhaust 1	0.0394 ± 0.0059 in (1 ± 0.15 mm)
Valve Seat Angle - Intake	45 °
Valve Seat Angle - Exhaust	60,5 °
Valve seat runout	0.001 in (0.029 mm)
Valve tappet bore diameter	1.10 – 1.10 in (28 – 28.03 mm)
Camshaft bore diameter	0.984 – 0.985 in (25 – 25.03 mm)

Valve

Item	Specification
Valve Head Diameter - Intake	1.185 ± 0.004 in (30.1 ± 0.1 mm)
Valve Head Diameter - Exhaust	0.980 ± 0.006 in (24.9 ± 0.15 mm)
Valve Stem Diameter - Intake	0.1956 ± 0.0003 in (4.968 ± 0.007 mm)
Valve Stem Diameter - Exhaust	0.1952 ± 0.0003 in (4.958 ± 0.0075 mm)
Valve Stem-to-Guide Clearance - Intake	0.0010–0.0023 in (0.025–0.059 mm)
Valve Stem-to-Guide Clearance - Exhaust	0.0014–0.0027 in (0.0345–0.0695 mm)
Valve Face Runout	0.002 in (0.05 mm)
Valve Face Angle - Intake	44,3 °
Valve Face Angle - Exhaust	60,1 °

Crankshaft

Item	Specification
Main Journal Diameter	1.889 – 1.890 in (47.98 – 48 mm)
Production Repair	1.840551–1.856299 in (46.75–47.15 mm)
Main Bearing Clearance	0.0009–0.0020 in (0.024–0.052 mm)
Connecting Rod Journal Diameter	1.731 – 1.732 in (43.98 – 44 mm)
Production Repair	1.683–1.699 in (42.75–43.15 mm)
End of Playback	0.005 – 0.017 in (0.12 – 0.43 mm)

Rings

Item	Specification
Width - Top	0.0461 – 0.0469 in (1.17 – 1.19 mm)
Width - 2nd	0.0461 – 0.0470 in (1.17 – 1.195 mm)
Width - Oil	0.079 in (2 mm)
Ring End Gap (in Bore) - Top	0.0071 – 0.0110 in (0.18 – 0.28 mm)
Ring End Gap (in Bore) - 2nd	0.0276 – 0.0354 in (0.7 – 0.9 mm)
Ring End Gap (in Bore) - Oil	0.0079 – 0.0354 in (0.2 – 0.9 mm)

Valve Lifter

Item	Specification
Diameter	1.101 – 1.102 in (27.965 – 27.98 mm)
Lifter-to-Valve Clearance - Intake	0.009–0.013 in (0.24–0.33 mm)
Lifter-to-Valve Clearance - Exhaust	0.015–0.019 in (0.38–0.47 mm)
Lifter-to-Bore Clearance	0.0008 – 0.0026 in (0.02 – 0.065 mm)

Camshaft

Item	Specification
End of Playback	0.003 – 0.008 in (0.07 – 0.2 mm)
Cam Lobe Lift - Intake	0.31 in (7.9 mm)
Cam Lobe Lift - Exhaust	0.260 in (6.6 mm)
Runout (1) a	0.0008 in (0.02 mm)
Thrust Clearance	0.8697 ± 0.0008 in (22.09 ± 0.02 mm)
Journal Diameter	0.9831 ± 0.0004 in (24.97 ± 0.01 mm)
Journal-to-Bore Clearance	0.0008 – 0.0028 in (0.02 – 0.07 mm)

No. 3 Journal - Supported by No. 1 and No. 5 journals.

Connecting Rod

Item	Specification
Running Clearance	0.0009 – 0.0020 in (0.024 – 0.05 mm)
Bearing Clearance	0.0009 – 0.0017 in (0.024 – 0.044 mm)
Bearing Thickness (Class 1)	0.0590 – 0.0593 in (1.499 – 1.506 mm)
Bearing Thickness (Class 2)	0.0593 – 0.0596 in (1.506 – 1.513 mm)
Bearing Thickness (Class 3)	0.0596 – 0.0598 in (1.513 – 1.52 mm)
Bearing Thickness (Class 4)	0.0598 – 0.0601 in (1.52 – 1.527 mm)
Crank Bore Diameter	1.851 – 1.852 in (47.025 – 47.045 mm)
Pin Bore Diameter	0.8275 – 0.8277 in (21.018 – 21.024 mm)
Length (Center-to-Center)	5.372 in (136.45 mm)