Hyundai Accent Quiz
Suspension

Rear Wheel Toe-in Adjustment

In this manual: Suspension
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

Rear wheel toe-in: 3±2 mm

When adjusting rear wheel toe-in, turn the adjusting bolt on the lower control arm (B) by the same angle on both sides of the vehicle.
The eccentric bolt must be turned within a range of 90°.

Внутри автомобиля: положительное схождение

Inside of the vehicle: positive toe-in

Outside of the vehicle: negative toe-in

The scale is graduated at approximately 2.4 mm, which corresponds to an angle of 14'.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.