Hyundai Accent Quiz
Body

Moldings

In this manual: Body
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read
1special tools

Молдинги
Moldings

1 – roof molding;
2 – door moldings.

Removal and installation

Door Molding

PROCEDURE

Специальным инструментом 09800-21000, начиная с любого конца молдинга, отделите

Using special tool 09800-21000, starting from either end of the moulding, separate it from the front and rear doors.

Be careful not to scratch the doors.

Roof Moulding

PROCEDURE

1. Лезвием отвертки, как рычагом, отделите конец молдинга крыши так, как показано

1. Using a screwdriver blade as a lever, separate the end of the roof moulding as shown in the illustration.

To prevent damage to the roof, wrap the screwdriver blade with cloth.
Be careful not to scratch the body.

2. Pull and remove the roof moulding.
3. Installation is performed in the reverse order of removal.

Replace damaged clips if necessary.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.