Engine Compartment Fuse Panel Replacement

Blade Type Fuse

Cartridge Type Fuse

1. Turn off the engine.

2. Turn off all other switches.

3. Remove the fuse panel cover by pressing the tab and pulling up.

4. Check the removed fuse. Replace it if it is blown. To remove or insert a fuse, use the fuse puller in the engine compartment fuse panel.

5. Insert a new fuse of the same type, rating, and make sure it fits securely in the clips. If it does not fit securely, contact an authorized HYUNDAI dealer.

CAUTION

After checking the fuse panel, securely close the engine compartment fuse panel cover until it clicks.

If the fuse panel cover is not closed properly, water may leak inside, which may cause an electrical system malfunction.

Multi-Purpose Fuse (Main Fuse)

If the multi-purpose fuse is blown, it must be removed as follows:

1. Turn off the engine.

2. Disconnect the negative battery cable.

3. Remove the fuse panel cover by pressing the tab and pulling it up.

4. Remove the nuts shown in the illustration above.

5. Replace the fuse with a new one of the same rating.

6. Reinstall in the reverse order of removal.

Information

If the multi-purpose fuse is blown, contact an authorized HYUNDAI dealer.