High Mounted Stop Light Replacement

[A]: High Mounted Stop Light

1. Open the trunk.

2. Remove the socket by turning it counterclockwise until the tabs on the socket align with the slots.

3. Remove the bulb from the socket. Press it in, turn it counterclockwise until the tabs on the bulb align with the slots in the socket, then pull the bulb out of the socket.

4. Install a new bulb by inserting it into the socket and turning it until it locks into place.

5. Install the socket into the assembly by aligning the tabs on the socket with the grooves in the assembly. Insert the connector into the assembly and turn the socket clockwise.