Wipers

Operates as follows when the ignition switch is ON.

: For a single wiper cycle, move the lever down and release it. The wipers will operate continuously if the lever is held in this position.

O : Wipers do not operate

--- : The wipers operate intermittently at the same wiping intervals. Use this mode in light rain or fog. To change the sensitivity, turn the speed control knob.

1 : Normal wiper speed.

2 : High wiper speed.

Information

If heavy snow or ice has accumulated on the windshield, defrost the windshield for approximately 10 minutes, or until the snow and/or ice is removed, before using the wipers to ensure proper operation.

Operating the wipers and washer before removing snow and/or ice may damage the wiper and washer system.