Side Repeater Turn Signal Lamp Replacement (if equipped)

Type A

1. Remove the lamp assembly from the vehicle by prying the lens and removing the lamp assembly.
2. Disconnect the lamp electrical connector.
3. Separate the socket from the lens components by turning it counterclockwise until the socket housing tabs align with the slots in the lens components.
4. Remove the bulb by pulling it from the socket.
5. Insert a new bulb into the socket.
6. Reassemble the socket with the lens.
7. Connect the lamp electrical connector.
8. Install the lamp assembly back onto the vehicle body.

Type B

If the lamp does not work, have an authorized HYUNDAI dealer inspect the vehicle.