Rear Combination Lamp Replacement (Hatchback)

(1) Stop lamp and tail lamp
(2) Rear turn signal lamp
(3) Back-up lamp
(4) Stop lamp or rear fog lamp (if equipped)

1. Open the luggage compartment.
2. Loosen the lamp assembly mounting screws using a Phillips screwdriver.
3. Remove the rear combination lamp assembly from the vehicle body.

4. Separate the socket from the assembly components by turning it counterclockwise until the socket housing tabs align with the slots in the assembly components.
5. Remove the bulb from the socket by pressing it and turning it counterclockwise until the bulb housing tabs align with the slots in the socket. Remove the bulb by pulling it from the socket.
6. Insert a new bulb into the socket and turn it until it locks.
7. Install the socket into the assembly, aligning the socket housing tabs with the slots in the assembly components. Insert the socket into the assembly and turn it clockwise.
8. Install the lamp assembly on the vehicle body.
9. Tighten the screws.