Hyundai Tucson LM Quiz
Engine Control System/Fuel System

Fuel Pressure Control Valve Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
4steps
~24min
2/5difficulty
Done 0 of 4

Inspection

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the fuel pressure control valve connector.
  3. Measure the resistance between terminals 1 and 2 of the fuel pressure control valve.
  4. Make sure the resistance is within specification.

    Specification: Refer to "Specifications"

Removal

(See Fuel System - "High Pressure Fuel Pump")

Installation

(See Fuel System - "High Pressure Fuel Pump")

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.