High Beam Assist Malfunction and Limitations

System Malfunction

If the High Beam Assist (HBA) system does not operate properly, the warning message "Check High Beam Control System" may appear and the warning light may illuminate on the instrument cluster. Contact an authorized HYUNDAI dealer.The warning light may illuminate on the instrument cluster. Contact an authorized HYUNDAI dealer.

High Beam Assist Limitations

The High Beam Assist may not operate properly in the following situations:

• The headlights of an oncoming or preceding vehicle are damaged or out of the detection range.
• The headlights of an oncoming or preceding vehicle are covered with dust, snow, or water.
• The headlights of an oncoming or preceding vehicle are off, but the fog lights are on.
• There are lights that have a similar shape to the lights of the vehicle ahead.
• The headlights have not been repaired or replaced properly.
• The headlights are not aimed properly.
• You are driving on a narrow winding road, an uneven road, or a hill going up or down.
• The vehicle ahead is only partially visible at an intersection or on a curved road.
• A temporary reflector or flashing light is ahead (construction site).
• There is a traffic light, a reflective sign, an LED sign, or reflectors ahead.
• The road is wet, or covered with snow or ice.
• A sudden curve appears.
• The vehicle is tilted due to a flat tire or is being towed.
• The headlights of an oncoming or preceding vehicle are not detected due to exhaust gas, smoke, fog, snow, blizzard, water spray on the road, or condensation on the windshield, etc.

Information

For more information on the limitations of the front view camera, refer to "Forward Collision-Avoidance Assist (FCA)" in chapter 7.

WARNING

• Always check road conditions and take appropriate measures as necessary to drive safely. You are responsible for operating your vehicle safely.
• If the High Beam Control system does not operate properly, use the turn signal lever to switch between high and low beams.
• The High Beam Assist system may not operate for 15 seconds immediately after the vehicle is started or when the front view camera is initializing.