Jeep Wrangler Quiz
STARTING AND OPERATING

ParkSense Rear Park Assist System Service

In this manual: STARTING AND OPERATING
INTRODUCTION — 5KNOW YOUR VEHICLE — 177GETTING TO KNOW THE INSTRUMENT PANEL — 77STARTING AND OPERATING — 126MULTIMEDIA — 106SAFETY — 89IN CASE OF EMERGENCY — 24SERVICE AND MAINTENANCE — 105SPECIFICATIONS — 16CUSTOMER ASSISTANCE — 7
~1min read

During vehicle startup, when the ParkSense Rear Park Assist System detects a fault condition, the instrument cluster display will sound a single chime once per ignition cycle, and it will display "PARKSENSE UNAVAILABLE REAR SENSORS WIPE" or "PARKSENSE UNAVAILABLE SERVICE REQUIRED".

When the gear selector is in REVERSE and the system has detected a fault condition, the instrument cluster display will show "PARKSENSE UNAVAILABLE REAR SENSORS WIPE" or "PARKSENSE UNAVAILABLE SERVICE REQUIRED" as long as the vehicle is in REVERSE. Under this condition, ParkSense will not operate.

If "PARKSENSE UNAVAILABLE REAR SENSORS WIPE" appears in the instrument cluster display, make sure the outer surface and lower side of the rear fascia/bumper are clean and free of snow, ice, mud, dirt, and other obstructions, then turn the ignition off. If the message continues to appear, see an authorized dealer.

If "PARKSENSE UNAVAILABLE SERVICE REQUIRED" appears in the instrument cluster display, see an authorized dealer.

Test yourself

A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.