Single-Use Parts
Advanced Driver Assistance System (Parking)
In this manual: Single-Use Parts
39steps
~234min
4/5difficulty
Done 0 of 39
Contents:
Components and Components Location. Wide Angle Camera Specification
Components and Components Location
Component
[Front]
[Rear]
| 1. Wide Angle Front Camera 2. Wide Angle Side Camera 3. Wide Angle Rear Camera 4. Front Ultrasonic Sensor |
5. Rear Ultrasonic Sensor 6. Front Corner Ultrasonic Sensor 7. Rear Corner Ultrasonic Sensor |
Wide Angle Camera Specification
Specification
| Item | Specification | |
| Rated voltage (V) | 6.7 | |
| Operating voltage (V) | 6.2 - 7.2 | |
| Quantity | RVM | 1 |
| BVM, SVM | 4 | |
Wide Angle Camera Description and Operation
Description and Operation
| Item | Name | Function |
| Driving Safety | Blind Spot View Monitor (BVM) BVM (Blind-Spot View Monitor) |
When operating the turn signal switch, the rear side view is displayed on the cluster. |
| Parking Safety | Rear View Monitor RVM (Rear View Monitor) |
RVM displays the rear view during driving and parking. |
| Surround View Monitor SVM (Surround View Monitor) |
SVM displays the surrounding view during driving and parking. |
Wide Angle Camera On Vehicle Inspection
On Vehicle Inspection
Visual inspection If the function of RVM, SVM, PCA, or RSPA is not operable or DTC occurs, check the following below.- Check the cleanliness of the wide angle camera mounting location.
- If the wide angle camera lens is contaminated with snow, dust, or stickers, the performance may deteriorate.
- If the wide angle camera lens glass is damaged, the performance may deteriorate.
- Check the condition around the wide angle camera.
- If a door or trunk (tailgate) equipped with a wide angle camera is opened, an abnormal screen may be displayed.
- Check the shape and condition of the wide angle camera mounting location.
- If the vehicle is tilted due to cargo loading, etc. the accuracy of parking guidelines and SVM top view may be reduced.
- If moisture enters the wide angle camera lens, performance may deteriorate.
- Check the wide angle camera and driver assistance parking controller in case of a trouble code.
- Check for damage to the wide angle camera, ADAS parking ECU.
- Check connection status to the wide angle camera, ADAS parking ECU connector and wiring.
- Check the button operation.
- For RVM/SVM specification, press the parking view button (A) below 1 second to check RVM/SVM screen is properly displayed.
- For RSPA specification, press the parking view button (A) 1 second or above to confirm RSPA operating status.
| Symptom | Suspected Cause | ||
| Dirty lens | Damaged lens | Airtightness failure | |
| Blurry and display quality trouble | Exterior stain | Lens coating peeled | Inflow of water in lens |
| Countermeasure | Clean the exterior of wide angle camera | Replace the wide angle camera | Replace the wide angle camera |
| Symptom | Suspected Cause | ||
| Dirty lens | Damaged lens | Airtightness failure | |
| Any object or line on monitor | Exterior stain | Lens crack | Crack and inflow of water |
| Countermeasure | Clean the exterior of wide angle camera | Replace the wide angle camera | Replace the wide angle camera |
|
- The wide angle camera can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide")
- Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
- S/W Management : Controlling other features including system option setting and zero point adjustment. (S/W Management → Advanced Driver Assistance System_Parking → System Identification) (S/W Management → Advanced Driver Assistance System Parking → SVM Calibration Mode) (S/W Management → Advanced Driver Assistance System Parking → SVM - Calibration Mode) (S/W Management → Advanced Driver Assistance System Parking → SVM Self-calibration mode)
Refer to the KDS screen for operating conditions and details.
Wide Angle Camera Removal and Installation
Removal
| In the case of poor image quality or poor focus, first check the surface condition of the wide-angle camera lens and contamination by foreign substances. |
- Perform the order below with the KDS before replacing the wide angle camera. (S/W Management → Advanced Driver Assistance System_Parking → System Identification)
Refer to the KDS screen for operating conditions and details. - Remove the front center lamp assembly. (Refer to Body - "Front Center Lamp")
- Remove the camera (A) after removing the screws.
- Remove the outside mirror housing cover. (Refer to Body - "Outside Mirror")
- Remove the camera (A).
- Disconnect the camera connector (A).
- Remove the tailgate outside handle switch assembly. (Refer to Body - "Tailgate Switch")
- Remove the rear view camera.
- Disconnect the power tailgate outside handle switch connector (B).
- Remove the camera (A) after removing the screws.
Clip position :
Installation
- Install in the reverse order of removal.
- Perform the wide angle camera tolerance calibration. (Refer to Wide Angle Camera - "Adjustment")
- If there is any abnormality after replacing the wide angle camera, replace the ADAS parking ECU and check the normal operation.
- If the fault persists after replacing the ADAS parking ECU, do not replace the ADAS parking ECU.
Wide Angle Camera Adjustment ➤
Driver Parking Assistance Switch Removal and Installation
Removal
|
- Remove the console switch. (Refer to Body - "Floor Console Upper Cover")
Installation
|
- Install in the reverse order of removal.
ADAS Parking ECU (ADAS_PRK) Specification. ADAS Parking ECU (ADAS_PRK) On Vehicle Inspection
ADAS Parking ECU (ADAS_PRK) Specification
Specification
| Item | Specification |
| Rated voltage (V) | 12.0 |
| Operation voltage (V) | 9.0 - 16.0 |
| Quantity | 1 |
ADAS Parking ECU (ADAS_PRK) On Vehicle Inspection
On Vehicle Inspection
Diagnostic with KDS- The ADAS parking ECU can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide")
- Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
- S/W Management : Controlling other features including system option setting and zero point adjustment. (S/W Management → Advanced Driver Assistance System_Parking → System Identification) (S/W Management → Advanced Driver Assistance Systems_Parking → Variant Coding)
Refer to the KDS screen for operating conditions and details.
ADAS Parking ECU (ADAS_PRK) Removal and Installation
Removal
|
- Remove the cluster unit. (Refer to Body - "Cluster Unit")
- Separate the ADAS_PRK (A) after removing the bolts.
Tightening torque : 3.6 - 4 N·m (0.37 - 0.41 kgf·m, 2.7 - 3.0 lb·ft, 32.1 - 35.6 lb·in) - Remove the ADAS_PRK (A) after disconnecting the connector (B).
- Remove the ADAS parking ECU.
- Remove the bracket (A) by removing the nuts.
Tightening torque : 3.6 - 4 N·m (0.37 - 0.41 kgf·m, 2.7 - 3.0 lb·ft, 32.1 - 35.6 lb·in) - Remove the ADAS parking ECU.
- Separate the cooling fan (A) after removing the screws.
- Remove the cooling fan (A) after disconnecting the connector (B).
Installation
|
- Install in the reverse order of removal.
Ultrasonic Sensor Specification. Ultrasonic Sensor Description and Operation
Ultrasonic Sensor Specification
Specification
| Item | Specification | |
| Rated voltage (V) | 12.0 | |
| Operation voltage (V) | 9.0 - 16.0 | |
| Quantity | PDW-F/R, PCA-R | 8 |
| PDW-F/R/S, PCA-F/S/R, RSPA 2 | 12 | |
Ultrasonic Sensor Description and Operation
Description and Operation
| Item | Name | Function |
| Parking Safety | Parking Distance Warning-Forward/Reverse PDW-F/R (Parking Distance Warning-Forward/Revers) |
Detects the front/rear objects and chimes the warning while going forward/reverse. |
| Parking Distance Warning-Forward/Side/Reverse PDW-F/R/S (Parking Distance Warning-Forward/Side/Reverse) |
Detects the front/side/rear objects and chimes the warning while going forward/reverse. | |
| Parking Collision-Avoidance Assist-Reverse PCA-R (Parking Collision-Avoidance Assist-Reverse) |
Detects pedestrians and objects around the vehicle when driving backward and assists in collision avoidance with warning or braking. | |
| Parking Collision-Avoidance Assist-Forward/Side/Reverse PCA-F/S/R (Parking Collision-Avoidance Assist-Forward/Side/Reverse) |
Detects the front/lateral/rear objects, chimes the warning and engages the brake to avoid collision while going forward/reverse. | |
| Parking Convenience | Remote Smart Parking Assist (RSPA) | Remote smart parking/exit assistance using the smart key, and parking space detection. |
Ultrasonic Sensor On Vehicle Inspection
On Vehicle Inspection
Visual inspection If there is a problem with PDW, PCA or RSPA check the items below.- Checking bumper cleanliness
- If snow or water droplets freeze on the ultrasonic sensor surface, the performance may deteriorate.
- If there are foreign substances such as mud on the surface of the ultrasonic sensor, the performance may deteriorate.
- Check the condition around the bumper
- If an object generating ultrasonic waves is nearby, the performance may deteriorate.
- If decorations are attached around the ultrasonic sensor, the performance may deteriorate.
- Checking bumper geometry or mounting status
- If the ultrasonic sensor and the peripheral part are arbitrarily separated, the performance may deteriorate.
- If an impact is applied to the surface of the ultrasonic sensor or if it is damaged by scratches, the performance may deteriorate.
- If the installation state of the ultrasonic sensor is different from that at the time of shipment of the vehicle, the performance may deteriorate.
- If decorations are attached around the ultrasonic sensor, the performance may deteriorate.
- Check the ultrasonic sensor installation status when a trouble code occurs
- Check the button operation
- For PDW specification, press the parking safety button (A) briefly (less than 1 second) to confirm PDW On/Off.
- For PCA specification, press the parking safety button (A) briefly (more than 1 second) to confirm PCA On/Off.
- The ultrasonic sensor can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide")
- Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS. (Refer to DTC guide when fault code is found.)
Refer to the KDS screen for operating conditions and details.
Ultrasonic Sensor Removal and Installation
Removal
|
| For failures such as PDW false warnings or non-warning, first check the surface condition of the ultrasonic sensor and contamination by foreign substances. |
- Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly")
- Disconnect the ultrasonic sensor connector (A).
- Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
- Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly")
- Disconnect the ultrasonic sensor connector (A).
- Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow.
- Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly")
- Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly")
- Disconnect the ultrasonic sensor connector (A). [Front] [Rear]
- Remove the ultrasonic sensor (A) by pushing the sensor holder in the direction of arrow. [Front] [Rear]
Installation
|
- Install in the reverse order of removal.
Was this page helpful?