Inspection of Driver Airbag Module (DAB) and Clock Spring

Driver Airbag (DAB)

If any inappropriate parts are found during the following inspection, replace the airbag module with a new one.

1. 1
   Inspect the pad cover for dents, cracks, or deformation.
2. 2
   Inspect the airbag module for dents, cracks, or deformation.
3. 3
   Check the hooks and connectors for damage, the terminals for deformation, and the harness for binding.
4. 4
   Inspect the airbag inflator housing for dents, cracks, or deformation.

   

5. 5
   Install the airbag module on the steering wheel to check its fit or alignment with the wheel.
6. 6
   If at least one abnormal point is found in the following inspections, replace the clock spring with a new one.
7. 7
   Check the connectors and protective tube for damage, and the terminals for deformation.

   

Clock Spring