Installation of Side Airbag Module (SAB)

Remove the ignition key from the vehicle.

Disconnect the negative battery cable and wait at least thirty minutes seconds.

Install the new seat back assembly. (Refer to Body - Seat)

Install the front seat assembly. (Refer to Body - Seat group)

Recline the seat back and fully slide the front seat forward, making sure the harness wires are not pinched or interfere with other parts.

Connect the negative battery cable.

After installing the side airbag module (SAB), check the system operation:

A.	Turn the ignition ON; the SRS indicator should illuminate for about six seconds and then go off.