Kia Sorento: Using a USB Device

To use an external USB device, make sure it is not connected when starting the vehicle. Connect the device after starting the vehicle.
If the engine is started while a USB device is connected, the USB device may be damaged. (USB memory devices are very sensitive to electrostatic discharge.)
If the engine is started or turned off while an external USB device is connected, the external USB device may not operate.
The system may not play unauthorized MP3 or WMA files. It can only play MP3 files with a compression rate from 8 kbps to 320 kbps. It can only play WMA music files with a compression rate from 8 kbps to 320 kbps.
Take precautions against static electricity when connecting or disconnecting an external USB device.
An encrypted MP3 player is not recognized.
Depending on the condition of the external USB device, the connected external USB device may not be recognized.
If the formatted byte/sector setting of the external USB device is not 512 BYTE or 2048 BYTE, the device will not be recognized.
Use only a USB device formatted in FAT 12/16/32.
USB devices without USB I/F authentication may not be recognized.
Make sure the USB connector does not come into contact with the human body or other objects.
If you repeatedly connect and disconnect the USB device in a short period of time, the device may break.
You may hear an unusual noise when connecting or disconnecting the USB device.
If you disconnect an external USB device during playback in USB mode, the external USB device may be damaged or malfunction. Therefore, disconnect the external USB device when the audio system is off or in another mode (e.g., Radio, CD).
Depending on the type and capacity of the external USB device, or the type of files stored on the device, the time required to recognize the device may vary.
Do not use the USB device for purposes other than playing music files.
Video playback via USB is not supported.
Using USB accessories, such as chargers or warmers with a USB I/F, may reduce performance or cause problems.
If you use devices such as a separately purchased USB hub, the audio system may not recognize the USB device. In this case, connect the USB device directly to the vehicle's multimedia terminal.
If the USB device is divided into logical drives, the car audio system recognizes only the music files on the drive with the highest priority.
Devices such as MP3 players, cellular phones, or digital cameras may not be recognized if they do not conform to the USB I/F standard.
Charging via USB may not be supported by some mobile devices.
USB hard drives or USB devices that are prone to connection failure due to vehicle vibration are not supported (i-stick type).
Some non-standard USB devices (USB type with a metal cover) may not be recognized.
Some USB flash memory card readers (such as CF, SD, micro SD, etc.) or external hard drive types may not be recognized.
Music files protected by DRM (Digital Rights Management) are not recognized.
Data on the USB storage device may be lost when using this audio system. Always back up important data to a personal storage device.

Please avoid using USB storage devices that may be used as key rings or cell phone accessories, as they may damage the USB port. Make sure to use only the plug type of connecting products.

Using a USB Device

Test yourself