Kia Stinger CK Quiz
Body (Interior and Exterior)

Cluster Fascia Panel

In this manual: Body (Interior and Exterior)
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
11steps
~66min
3/5difficulty
Done 0 of 11

Components and Component Location

Component Location

1. Cluster Fascia Panel

Repair Procedures

Replacement

  1. Remove the side cover of the airbag [LH] (A) using a trim remover.

  2. Separate the lower panel of the emergency cluster (A) after loosening the bolts and screws.

  3. Disconnect the connector from the airbag lower switch (A).

  4. Remove the garnish [LH] (A) after loosening the mounting screws.

  5. Remove the driver side panel (A) of the protector garnish after loosening the mounting screws.

  6. Remove the side cover of the airbag [RH] (A) using a trim remover.

  7. Remove the garnish [RH] (A) after loosening the mounting screws.

  8. Separate the passenger side panel (A) after loosening the mounting screws.

  9. Disconnect the Start/Stop button connector (A), then remove the crash pad ornament.

  10. Remove the front cluster panel (A) using a trim remover.

  11. Install in the reverse order of removal.

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.