Kia Optima DL3 Quiz
Body (Interior and Exterior)

Front Seat Cushion Cover

In this manual: Body (Interior and Exterior)
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
10steps
~65min
4/5difficulty
1special tools
Done 0 of 10

Components and Component Location

Component Location

1. Front Seat Cushion Cover

Repair Procedures

Replacement

  1. Remove the front seat assembly.

    (Refer to Front Seat - "Front Seat Assembly")

  2. Remove the front seat outer cover.

    (Refer to Front Seat - "Front Seat Outer Cover")

  3. Remove the front seat inner cover.

    (Refer to Front Seat - "Front Seat Inner Cover")

  4. Remove the front seat lower shield (A).

  5. Disconnect the front seat cushion connectors (A).

  6. Disconnect the protector (A) on the side of the front seat cushion cover. Using a puller, remove the front seat cushion cover.

    [Upper]

    [RH]

    [LH]

    [Lower]

  7. Remove the front seat cushion assembly (A) from the front seat cushion frame.

  8. After removing the hook-and-loop fastener (A) and the retaining ring clips (B) inside the front seat cushion cover, remove the seat cushion cover (C).

  9. Remove the front seat cushion cover (A) from the front seat cushion pad.

  10. To install, reverse the removal procedure.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.