Kia Optima DL3 Quiz
Body Electrical System

Integrated Memory Seat (IMS) Switch

In this manual: Body Electrical System
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
8steps
~48min
2/5difficulty
Done 0 of 8

Circuit Diagrams

Connector and Terminal Function

Repair Procedures

Removal

  1. Disconnect the negative battery cable.

  2. Remove the front driver door trim panel.

    (Refer to Body - "Front Door Trim Panel")

  3. Disconnect the IMS switch (A) connector.

  4. Remove the IMS switch (A) by sliding the hooks in the direction indicated by the arrow.

Installation

  1. Install in the reverse order of removal.

Inspection

  1. Disconnect the negative battery cable.

  2. Remove the front driver door trim panel.

    (Refer to Body - "Front Door Trim Panel")

  3. Disconnect the IMS switch (A) connector.

  4. While pressing each switch, check the current flow between the integrated memory seat switch connector and ground.

    Switch Connector Terminal Resistance (±1%)
    SET 3-5 680 Ω
    Memory 1 1.5 kΩ
    Memory 2 3.3 kΩ

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.