Kia Optima DL3 Quiz
Body Electrical System

Start/Stop Button

In this manual: Body Electrical System
General Information — 8Advanced Driver Assistance System (ADAS) — 21Maintenance — 27Engine Mechanical System — 45Engine Electrical System — 11Emission Control System — 11Engine Control System/Fuel System — 25Automatic Transmission — 20Drive Shaft and Axle — 7Suspension System — 22Steering — 7Restraints — 11Brake System — 22Body (Interior and Exterior) — 116Body Electrical System — 90Heating, Ventilation, and Air Conditioning — 32
5steps
~30min
2/5difficulty
Done 0 of 5

Circuit Diagrams

Connector and Terminal Function

Repair Procedures

Removal

  1. Disconnect the negative battery cable.

  2. Remove the decorative trim [RH].

    (Refer to Body — Crash Pad Garnish)

  3. Remove the center ventilation vent garnish (A) after loosening the mounting screws.

  4. Disconnect the start/stop button connector (A) and the hazard switch connector (B).

  5. Remove the start/stop button (A) after loosening the mounting screws.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Optima DL3 quiz: every answer comes with an explanation and a link to the manual page.