Kia Picanto JA Quiz
Body Electrical System

eCall Button

In this manual: Body Electrical System
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
12steps
~72min
3/5difficulty
Done 0 of 12

Components and Component Location

Component

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Using a screwdriver or pry tool, separate the map lamp lens (A) from the map lamp.
  3. Remove the lamp (A) after loosening the screws.
  4. Remove the map lamp unit (B) after disconnecting the map lamp connector (A).
  5. Remove the map lamp cover (A) after loosening the mounting screws.
  6. Remove the eCall button (A) after loosening the mounting screws.

Installation

  1. Install the eCall button.
  2. Install the map lamp cover.
  3. Connect the map lamp connector.
  4. Install the map lamp.
  5. Install the map lamp lens.
  6. Connect the negative (-) battery terminal.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.