Junction Box (Passenger Compartment)

Components and Component Location

Component Location

I/P Junction Block

Circuit (I/P Junction Block)

Repair Procedures

Fuse Inspection

1. 1

   Make sure the fuse holders are secured firmly and the fuses are securely held in place by the holders.

2. 2

   Make sure that each fuse circuit has the correct fuse rating.

3. 3

   Inspect the fuses for damage.

Diagnosis Using KDS/GDS

1. 1

   The Interior Distribution Block can be diagnosed using KDS/GDS. The Interior Distribution Block communicates with KDS/GDS, which then displays the inputs and outputs together with the codes.

2. 2

   To diagnose the Interior Distribution Block function, select the vehicle model and interior.

3. 3

   To view the current input/output value of the Interior Junction Block, select "Current DATA". Provides information on the input/output conditions of the Interior Junction Block.

   

4. 4

   To perform a functional test of the Interior Distribution Block outputs, select "Active Test".

   

Removal

1. 1

   Disconnect the negative (-) battery terminal.

2. 2

   Remove the airbag lower panel.

   (Refer to Body - "Under Cover Panel")

3. 3

   Disconnect the connectors (A) on the fuse side of the Interior Distribution Block. Lock.

4. 4

   Remove the wiring harness clip of the interior junction block (B).

   

5. 5

   Remove the interior junction block (A) after loosening the mounting nuts.

   

6. 6

   Disconnect the connectors (A) from the rear of the Interior Distribution Block. Lock.

   

Installation

1. 1

   Install the interior junction block.

2. 2

   Connect the connectors of the interior junction block.

3. 3

   Install the emergency pad lower panel.

4. 4

   Connect the negative (-) battery terminal.

5. 5

   Make sure all systems operate properly.