Turn Signals and Lane Change Signals

The ignition key must be in the ON position for the turn signals to operate. To activate the turn signals, move the lever up or down (A).

The green arrows on the instrument cluster indicate which turn signal is operating. They cancel automatically after the turn is completed.

If the indicator continues to flash after the turn, manually return the lever to the OFF position.

To signal a lane change, move the turn signal lever slightly and hold it in that position (B). The lever will return to the OFF position when released.

If the indicator continues to illuminate without flashing, or flashes abnormally, one of the turn signal bulbs may have burned out and need to be replaced.

One-Touch Lane Change Function

To activate the one-touch lane change function, move the turn signal lever slightly and then release it. The lane change signals will flash 3 times.

NOTICE

If the indicator flashes abnormally fast or slow, a bulb may be burned out or there may be a poor electrical connection in the circuit.