Engine
Accelerator Pedal Released Position Learning
In this manual: Engine
5steps
~30min
2/5difficulty
Done 0 of 5
Description
Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time the harness connector of the accelerator pedal position sensor or ECM is disconnected. (For details, refer to Work Procedure .)
Work Procedure
START
Make sure that accelerator pedal is fully released.
Ignition switch ON and wait at least 2 seconds.
Ignition switch OFF and wait at least 10 seconds.
Ignition switch ON and wait at least 2 seconds.
Ignition switch OFF and wait at least 10 seconds.
END
Was this page helpful?