Mixture Ratio Self-Learning Value Clear
Description
This describes how to erase the mixture ratio self-learning value. For the actual procedure, follow the instructions in “Diagnosis Procedure”. (For details, refer to Work Procedure .)
Work Procedure
START
With CONSULT
Start engine and warm it up to normal operating temperature.
On CONSULT screen, select “ECM”>>“Work support”>>“Air fuel ratio learning value clear”.
Clear mixture ratio self-learning value by touching “CLEAR”.
With GST
Start engine and warm it up to normal operating temperature.
Ignition switch OFF.
Disconnect mass air flow sensor (bank 1) harness connector.
Restart engine and let it idle for at least 5 seconds.
Stop engine and reconnect mass air flow sensor (bank 1) harness connector.
Select Service $03 with GST. Make sure DTC P0102 is detected.
Select Service $04 with GST to erase the DTC P0102.
END