Engine

Stop/start System Inoperative

2steps
~12min
1/5difficulty
Done 0 of 2

Diagnosis Procedure

CHECK STOP/START PROHIBIT CAUSE

With CONSULT

Select “Stop/Start prohibit cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.

Does "Stop/Start prohibit cause data recorder" show fail-safe?

YES>>

GO TO 2.

NO>>

Check the operating status of system stop / start. Refer to System Description. After confirmation, go to 4.

CHECK "Stop/Start error" OF CONSULT DATA MONITOR ITEM

With CONSULT

  1. Select "Stop/Start error" in "Monitor Menu" of “Data monitor” mode in CONSULT.

  2. Check the displayed data monitor items. Refer to CONSULT Function.

Are there any "NG" monitor items?

YES>>

After confirming the "NG" item, go to 3.

NO>>

GO TO 3.

CHECK DTC

With CONSULT

Perform “All DTC Reading” with CONSULT.

Does it detect the DTC associated with "Stop/Start error" of “Data monitor”?

YES>>

Perform trouble diagnosis of detected DTC. After repairing the defective part, go to 4.

NO>>

GO TO 4.

CHECK STOP/START INDICATOR / LAMP

Check the stop/start indicator / lamp.

WARNING LAMP/INDICATOR LAMP / INDICATORCONDITION
Stop/start indicator / lamp Not blinking

Is the stop/start indicator / lamp blinking?

YES>>

Refer to Symptom Table.

NO>>

INSPECTION END