Engine
Does Not Restart After the Stop/start System Is Activated
In this manual: Engine
~1min read
Diagnosis Procedure
CHECK SYMPTOM
Check the symptoms.
A stop/start indicator lamp turned on, and did an engine perform a stall at the time of restart from a stop/start system?
YES>>GO TO 2.
NO>>Refer to Symptom Table.
CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Star engine stall cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.
Is the cause of the engine not starting recorded?
YES>>Eliminate the cause and complete the inspection.
NO>>GO TO 3.
CHECK STARTER MOTOR (SUB STARTER & ALTERNATOR) OPERATION
Check the stater motor (sub starter & alternator *if equiped ) operation when engine restart during stop/start system operation.
Is the starter motor operated?
YES>>Refer to Symptom Table.
NO>>Perform “All DTC Reading” with CONSULT and perform trouble diagnosis for DTC indicated.
Was this page helpful?