Engine

Service After Replacing or Removing Engine Parts

~2min read

Description

×:Applicable

Part nameService performedService Manual itemReference
ReplacementRemoval
ECM × — Additional service when replacing ECM Refer to Work Procedure.
Accelerator pedal position sensor × ×*1 Accelerator pedal released position learning Refer to Work Procedure.
Electric throttle control actuator × ×*1, 2 Throttle valve closed position learning Refer to Work Procedure.
Idle air volume learning Refer to Work Procedure.
Electric intake valve timing control module × ×*1 Electric intake valve timing control actuator reference position learning Refer to Work Procedure.
Electric intake valve timing control actuator × ×*1 Electric intake valve timing control actuator reference position learning Refer to Work Procedure.
Crankshaft position sensor × — Electric intake valve timing control actuator reference position learning Refer to Work Procedure.
Intake camshaft position sensor × — Electric intake valve timing control actuator reference position learning Refer to Work Procedure.
Exhaust camshaft position sensor × — Electric intake valve timing control actuator reference position learning Refer to Work Procedure.

engine mechanical parts

  • timing chain

  • intake/exhaust camshaft

  • intake/exhaust camshaft sprocket

  • Piston

  • Connecting rod

  • Crankshaft

× × Electric intake valve timing control actuator reference position learning Refer to Work Procedure.
Turbocharger × — Wastegate valve closed position learning Refer to Work Procedure.
A/F sensor 1 × — Idle air volume learning Refer to Work Procedure.
O2 sensor 2 × — Idle air volume learning Refer to Work Procedure.
Mass air flow sensor × — Idle air volume learning Refer to Work Procedure.
Repair or replacement of parts affecting air-fuel ratio × — Idle air volume learning Refer to Work Procedure.
Engine oil × — Engine oil data reset Refer to Work Procedure.

*1:Harness connector disconnection is included.

*2:Carbon deposit cleaning is included.