Transmission & Driveline

Select Learning

7steps
~42min
2/5difficulty
Done 0 of 7
Work Procedure

PERFORM SELECT LEARNING (DRIVE/REVERSE LEARNING)

  1. Set the parking brake.

  2. Start the engine and wait 5 seconds.

  3. Shift the selector lever to the N position and hold more than 2 seconds, then to D position and wait for transmission engagement.

  4. Repeat step 3 ten (10) times.

  5. Shift the selector lever to the N position and hold more than 2 seconds, then to R position and wait for transmission engagement.

  6. Repeat step 5 ten (10) times.

  7. Shift the selector lever to the P position and turn the ignition OFF.

>>

WORK END