Headrest — Seats

To raise the headrest

Pull the headrest up to the desired height. Make sure it is locked in place.

To lower the headrest

Press button 1 and guide the headrest down to the desired height. Make sure it is locked in place.

To remove the headrest

Raise the headrest to its highest position (tilt the backrest rearward if necessary). Press button 1 and lift the headrest until it is released.

To refit the headrest

Insert the headrest posts into the sleeves (tilt the backrest rearward if necessary). Push the headrest down until it locks, then press button 1 to adjust it to the desired height. Check that each post 2 is locked in the seatback.

The headrest
is a safety component. Make sure it is in place and correctly positioned: the top of the headrest must be as close as possible to the top of your head, and the distance between your head and part A must be minimal.

To move the seat forward or backward

Lift lever 1 to unlock. At the desired position, release it and make sure the seat is locked in place.

For safety reasons, make these adjustments with the vehicle stationary. No objects must be on the floor (driver's front footwell). In the event of sudden braking, such objects may slide under the pedals and prevent their use.

To raise or lower the seat cushion

Operate lever 2 up or down as many times as necessary.

Heated seats

With the ignition on, press switch 3 for the desired seat. The indicator built into the switch lights up.

The system is thermostatically controlled. It regulates the heating and switches it off if necessary.

To recline the backrest

Turn wheel 4 and recline the backrest to the desired position.

So as not to
reduce the effectiveness of the seat belts, we advise you not to recline the seatbacks too far.

Centre armrest 5

To raise the armrest

Lift the armrest to the desired position.

To lower the armrest

Raise the armrest to the stowed position against the backrest, then lower it.

To stow the armrest

Raise the armrest to the stowed position A. Make sure it is locked in place.